BMC Molecular Biology BioMed Central

The katG mRNA of Mycobacterium tuberculosis and Mycobacterium smegmatis is processed at its 5' end and is stabilized by both a polypurine sequence and translation initiation Abstract Background: In Mycobacterium tuberculosis and in Mycobacterium smegmatis the furA-katG loci, encoding the FurA regulatory protein and the KatG catalase-peroxidase, are highly conserved. In M. tuberculosis furA-katG constitute a single operon, whereas in M. smegmatis a single mRNA covering both genes could not be found. In both species, specific 5' ends have been identified: the first one, located upstream of the furA gene, corresponds to transcription initiation from the furA promoter; the second one is the katG mRNA 5' end, located in the terminal part of furA.

Background mRNA decay is known to play an important role in the post-transcriptional regulation of gene expression in bacteria. Studies in Escherichia coli indicated a possible model, in which the endoribonuclease RNase E binds and cuts the mRNA, followed by RNase II and/or PNPase that degrade the fragments generated by RNase E cleavage [1][2][3][4][5]. The accessibility of the 5' end of an mRNA to RNase E has been shown to be an important mediator of stability in E. coli [6,7].
Much less is known about mRNA decay in other bacteria, particularly in gram positive species. Several studies, performed in Bacillus subtilis and Bacillus thuringiensis, indicated that the 5' terminal leader sequence has a relevant role in mRNA stabilization, either by containing a polypurine rich sequence or by the presence of a predicted 5'-terminal stem-loop structure [8][9][10][11][12]. Extensive mutagenesis was used to define how these two motifs influence mRNA stability and the presence of an RNase E-like ribonuclease, acting on the 5' end, has been suggested. Its action may be blocked by either the stem-loop structure and/or ribosomes located in proximity of the 5' terminus of the transcript [8,12].
In mycobacteria few examples of mRNAs stability control have been described [13][14][15]. The most interesting is the stability of the DNA gyrase mRNA in Mycobacterium smegmatis, which is 5' protected by a stem-loop structure, followed by a Shine-Dalgarno sequence for translation initiation. Disruption of the stem-loop caused loss of transcript stability [15].
In this work we report that the mycobacterial katG mRNA originates from specific processing of the longer bicistronic transcript, covering furA and katG. The katG mRNA encodes the catalase-peroxidase, responsible for the degradation of toxic oxygen compounds. In all studied mycobacterial species, the DNA region immediately upstream of katG encodes FurA [16][17][18][19]. Fur-like proteins are ubiquitous in bacteria, and act as transcriptional repressors that exhibit an iron-dependent DNA binding activity and regulate several genes involved in iron metabolism [20,21]. In Mycobacteria this role is not achieved by FurA, but by the iron dependent transcription regulator (IdeR) which plays a critical role in maintaining the intracellular iron homeostasis [22].
In recent years, genes directly or indirectly controlled by Fur-like proteins have been discovered, leading to the hypothesis that Fur proteins have a wider role in bacterial gene expression [23,24].
In mycobacteria, the organization of the furA-katG region is conserved, suggesting that it may constitute a single operon [16,17,19]. This hypothesis was confirmed by identification of a single furA-katG transcript in Mycobacterium bovis BCG [18,25]. In apparent contrast, two different 5' ends were identified by S1 mapping: the first coincides with the initiation codon of furA and is generated by transcription initiation at the furA promoter ( Fig. 1A; [18,25,26]); the second is 54 bp upstream of katG translation start codon. Master et al. [25] proposed that a katG promoter was present in this region ( Fig. 1A and 1B).
In M. smegmatis specific transcripts for furA and katG were identified by Northern blotting, but a single transcript encompassing both furA and katG genes was not detected [27]. Specific 5' ends were mapped by primer extension analysis [26,27]: the first (coordinate 1 in Fig. 1A) was due to transcription initiation from the furA promoter; two additional 5' ends were mapped upstream of katG, the first one, corresponding to coordinate 443, falls in the terminal part of the furA gene; the second is less intense and corresponds to coordinate 478, located in the furA-katG intergenic region. No specific promoter sequences were identified upstream of either 443 or 478.
In this work we addressed the question whether the katG 5' ends were generated by transcription initiation or by mRNA processing. Our results support the latter alternative. Furthermore, a polypurine sequence and translation initiation are both involved in katG mRNA stability.

The 5' end of katG mRNA is not generated by initiation of transcription
In a previous work, Milano et al. [27] reported the presence of a promoter region for katG expression in M. smegmatis, located in the terminal part of the upstream furA gene. In order to demonstrate the presence of this promoter, we amplified the M. smegmatis region that overlaps the 5' ends upstream of katG (coordinate 437-552) and cloned it in plasmid pMV261, substituting the hsp60 promoter region (pMYS648). In vitro transcription was performed in the presence of [α 32 P]CTP and M. smegmatis cell extract, comparing the transcripts synthesized by pMV261, from the constitutive hsp60 promoter, and pMYS648, from the potential katG promoter (Fig. 2). pMV261 produced an RNA of about 300 nt that may represent the RNA starting from the hsp60 promoter and terminating at the transcription terminator downstream. On the contrary, no transcript of the expected size for an mRNA starting at the hypothetical pkatG and terminating at the transcription terminator (about 200 nt) was detected when pMYS648 was used, suggesting that no promoter was present in this region. This data is in agreement with the absence of any promoter consensus sequences upstream of the 5' ends.
The furA-katG region in M Figure 1 The furA-katG region in M. tuberculosis and M. smegmatis. Panel A. Schematic representation of the furA-katG region. Genes are indicated by open boxes, the polypurine sequences (PPS) by a black box. The coordinates of the M. tuberculosis sequence are arbitrary, with coordinate +1 corresponding to the first codon of furA (coordinate 2,156,590 in the reverse strand of the M. tuberculosis complete genome sequence deposited in the GenBank:AL123456). Coordinates of the M. smegmatis sequence are arbitrary, with coordinate +1 corresponding to one bp immediately upstream of the furA start codon (Gen-Bank:NC_008596, [42]). The position of the 5' ends of katG mRNA (+428 in M. tuberculosis, [25]; 443 and 478 in M. smegmatis, [27] In order to exclude that a katG promoter was present in this region, we performed an RNA polymerase Chromatin Immunoprecipitation assay (RNApol-ChIP) on M. smegmatis mc 2 155. After rifampicin treatment in order to block RNA polymerase on promoter sequences [28], formaldehyde cross-linking, and sonication, the DNA-RNA polymerase complexes were immunoprecipitated with mouse monoclonal antibodies to the β subunit of E. coli RNA polymerase, as described in the Methods section. As rifampicin inhibits transcript elongation, we expected RNA polymerase to be trapped at any potential promoter. The precipitated DNA was then analyzed by quantitative RT-PCR to determine the amount of recovered DNA.
Specific oligonucleotides were used to amplify different 150-200 bp DNA fragments of the furA-katG region (fragments A, B, C, and D in Fig. 3). The amplified regions with the indication of the ratio relative to the amount of the fragment containing the pfurA promoter (fragment B) are reported in Fig. 3. Compared to fragment B, all the other regions were recovered with low frequency: in particular, the region where the potential katG promoter had previously been located (fragment C) was recovered with a relative value of 0.10. Thus, we concluded that a promoter was not present in this region and that the katG mRNA 5' end was produced by processing of a longer transcript.

The polypurine sequence preceding the katG start codon stabilizes the downstream transcript
In Bacillus subtilis and Bacillus thuringiensis polypurine sequences (PPS) in the 5' terminal part of several transcripts were reported to increase mRNA stability [9][10][11]. By sequence analysis of the region immediately upstream of katG in M. tuberculosis and M. smegmatis we identified a PPS four bases upstream of the katG translation start codon ( Fig. 1B; GGAAGGAA at coordinates 470-477 in M. tuberculosis; GAAAGGAAA at coordinates 487-495 in M. smegmatis). We tested whether the PPS in the mycobacterial katG mRNA was also able to stabilize the transcript.
An integrative plasmid was constructed, pMYS694, that carries the M. smegmatis sigA promoter [29] upstream of the lacZ reporter (Fig. 4A). Then, either the 437-531 region of M. smegmatis (pMYS690) or the 405-531 region of M. tuberculosis (pMYT733) were cloned between the sigA promoter and the lacZ gene. These regions cover the terminal part of the furA gene, the furA-katG intergenic region with the wild type PPS and the first codons of katG (Fig. 4A). Two mutant plasmids were also constructed, in which the PPS sequence was mutagenized (pMYS692 and pMYT735 carry CTCTGGAGG and CCTCCCTC, respectively; see Fig. 4A).
M. smegmatis mc 2 155 was transformed, and beta-galactosidase activity measured. As reported in Fig. 4A, beta-galac- MWM tosidase activity expressed by pMYS694 was increased 3.5fold in pMYS690 and 3.9-fold in pMYT733, which carry the wild type PPS. On the contrary, beta-galactosidase expressed from pMYS692 and pMYT735, carrying the mutated PPS, did not change significantly compared to the control pMYS694 (0.7 and 1.6 fold, respectively).

In vitro transcription
Furthermore, we measured the half-life of lacZ mRNA from the plasmids carrying M. smegmatis fragments. The mc 2 155 strains carrying pMYS694/690/692 were treated with rifampicin (see Methods) to block transcription and the RNAs were extracted from the cultures at 0, 2, 4, 10, and 30 minutes after the addition of the antibiotic. Quantitative RT-PCR was performed in order to measure the amount of RNA at the different time points and to evaluate the half lives in the three strains. The half life of the lacZ mRNA was increased from 0.4 minutes in pMYS694 to 2.2 minutes in pMYS690 (5.5 fold increase), whereas no substantial increase was observed in pMYS692, which carries the mutated PPS. These results suggest that the identified PPS is able to stabilize the katG-lacZ mRNA. Moreover, we observed a good correlation between the beta-galactosidase activity and the lacZ mRNA stability.
Primer extension analysis was performed on the RNA extracted from mc 2 155(pMYS690) and (pMYS692) (Fig.  4B). Two bands were detected in pMYS690: one corresponding to the previously mapped 5' end of sigA [29], and the other corresponding to the 5' end of katG (443 [27]) in M. smegmatis. The band at 443 appears very strong, in accordance with the stabilizing effect of the downstream PPS. The two signals were also present in pMYS692, but in this case the 443 band was visibly fainter, according to the decreased stability caused by the mutated PPS.

Relevance of translation in katG mRNA stability
In other gram positive bacteria it has been shown that ribosome binding and ternary complex formation are responsible for the PPS mediated stability, whereas translation appears not to be involved [11,31,32]. On the other hand, in many E. coli RNAs translation seems to contribute directly to transcript stability [33][34][35].
In order to evaluate the role of translation in increasing mRNA stability in our system, we constructed several plasmids in which DNA fragments of M. smegmatis were inserted in pMYS694 between the sigA promoter and the lacZ reporter gene (Fig. 5). pMYS690 carries an M. smegmatis region that starts from coordinate 437 and extends to the first 23 codons of katG, followed by a translation stop codon (TGA). pMYS727 carries the same DNA fragment, but the katG translation start codon was mutagenized to CCG.
In all these constructs translation of the downstream lacZ gene proceeds independently, by ribosome binding to the lacZ ribosome binding site and starting translation from its ATG start codon. Thus, beta-galactosidase activity and the stability of the lacZ transcript can be compared in the different constructs.
Both the amount of beta-galactosidase and of lacZ transcript were increased more than 3 fold in pMYS690 compared to pMYS694, whereas in pMYS727 relative expression was even lower than in the control. These results suggest that, beside the PPS, translation of the katG open reading frame is also directly involved in transcript stability.
Other plasmids were constructed in which the length of the katG open reading frame was varied: in pMYS720 a stop codon substitutes the katG start codon (TTG to TAA); in pMYS723 and pMYS744 the translation stop codon is located after 11 and 19 codons, respectively. We measured beta-galactosidase activity as an indication of the lacZ mRNA stability. pMYS720 expressed beta-galactosidase activity to a level similar to the pMYS694 control, confirming the relevance of translation for transcript stability. An increased expression of beta-galactosidase could be observed in pMYS723 and in pMYS744, in which translation can proceed for 11 and 19 codons, respectively. These data indicate that translation of about twenty or more codons is necessary for achieving full transcript stability. sequence, pMYS740 carries a 30 bp internal deletion (from 450 to 480), in pMYS743 five bp flanking the processing site have been substituted, and in pMYS749 five bp were substituted in order to allow the formation of a double stranded region corresponding to the processing site (see Fig. 6). For each plasmid the predicted structure of the RNA from sigA is reported in Fig. 6. RNAs were extracted from mc 2 155 strain transformed with the plasmids and primer extension was performed with oligo 809, internal to the downstream lacZ gene. The results indicated that in the wild type pMYS739 two signals were detectable: one corresponding to the 5' end due to sigA, the second corresponding to the processing site at 443. The only small effect of the 30 bp deletion in pMYS740 was the presence of a double signal at 442 and 443. The transcript of pMYS743, which carries a different sequence around the processing site, is normally processed at 443, whereas the transcript of pMYS749, in which a double stranded region is created, was no more correctly processed. In order to confirm that a double stranded RNA around 443 could not be processed, we constructed an other plasmid in which different bases were substituted in order to create a double stranded RNA, and also in this case processing at 443 did not occur (data not shown).
These data indicate that the ribonuclease responsible for the processing needs a single stranded RNA region for cutting.

The 5' end of the katG transcript in M. tuberculosis and M. smegmatis is a processing site
In a previous work [27] we suggested the presence of a promoter for M. smegmatis katG expression in the terminal part of the furA gene and we identified two 5' ends at coordinate 443 and 478. However, in this work we tried without success to use the cloned fragment for in vitro transcription: no RNA could be produced by pMYS648, in which the M. smegmatis 437-552 region has been cloned. Moreover, neither promoter consensus sequences were present upstream of 443 nor this region could be recovered by RNA-polymerase ChIP assays. Thus, we concluded  Fig. 1), and differ for the length of the following open reading frame: pMYS690 and pMYS727 carry the same DNA region, but the katG translation start codon TTG has been substituted in pMYS727 with a CCG codon; pMYS720 is mutated in the start codon of katG (TTG to TAA codon); pMYS723 and pMYS744 carry 11 and 19 codons of katG, respectively. Strain mc 2 155 was transformed with the plasmids and beta-galactosidase expression was measured, as described in Methods. Average betagalactosidase activity in Miller Units of three to eight different replicas ± standard deviation is reported. The average relative increment in beta-galactosidase activity is also indicated. The amount of lacZ transcript was evaluated by quantitative RT-PCR. N.T. = not tested.

Role of translation in mRNA stability
that the 5' end is not due to transcription initiation rather to processing of a longer transcript.
In M. tuberculosis a longer transcript, starting from pfurA, has been observed [18,25]. In M. smegmatis we were unable to detect a polycistronic furA-katG transcript by RT-PCR experiments [27]. This suggests that immediate processing may follow furA-katG transcript synthesis in M. smegmatis.
In the constructs in which the sigA promoter region has been cloned immediately upstream of the M. smegmatis fragment (pMYS690 and pMYS692), we could demonstrate the presence of a longer RNA, starting at psigA. Primer extension analysis also revealed the presence of a 5' end at 443, that is the same position in which the M. smegmatis furA-katG mRNA is cut. However, no primer extension signal was observed at 478. In fact, this latter 5' end was no longer detected in many primer extension experiments performed with RNAs extracted from mc 2 155 (unpublished data). We suggest that this signal, always less intense than the 5' end at 443, may arise by specific pausing of the reverse transcriptase.
Structure prediction and primer extension on mRNAs synthesized by different plasmids Figure 6 Structure prediction and primer extension on mRNAs synthesized by different plasmids. The structure of the transcripts starting at the sigA promoter in pMYS739, pMYS740, pMYS743 and pMYS749 were obtained with the m-fold structure prediction program of Zuker [41] and primer extension analyses were performed on RNAs extracted from mc 2 155 transformed with the different plasmids, with oligonucleotide 809. Sequence reactions obtained with the same oligonucleotide were run in the same gel. The position of the sigA promoter, the 443 processing site and the PPS region are indicated on the right. The arrows indicate the position of the cut on the sequence structure. The mutations are circled. The complementarity of the PPS to the 16S rRNA sequence (Fig. 1C) indicates that it could act as the katG ribosome binding site. Mutations altering the complementarity to the 16S rRNA decreased the amount of the lacZ transcript, suggesting that ribosome binding protects the RNA from degradation.
The role of ribosome binding sites in mRNA stabilization has been demonstrated in many gram-positive and gramnegative bacteria. It was shown that many mRNAs, like lacZ and ompA of E. coli [33,34,36], aprE, gsiB and ermC of B. subtilis [31,32,37,38], cryIIIA of B. thuringiensis [11], can be significantly destabilized by mutations in the ribosome binding site that interfere with ribosome binding by reducing its complementarity to 16S rRNA. This is the first example in mycobacteria, in which a polypurine rich sequence is able to confer stability to the downstream RNA likely by ribosome binding.
We could demonstrate that in our mycobacterial system translation is required for stabilization, and more than 20 codons are needed for conferring full stability to the transcript. Thus, we suggest that the ribonuclease that processes the transcript is impaired both by ribosome bound to the PPS and by translation of the first part of katG.

Regulation of KatG expression and processing of the katG transcript
In previous works [25,27], by means of two different reporter systems, katG expression was suggested to be originated from specific transcription initiation. Considering our new findings, indicating the absence of any promoter and the presence of a stabilizing sequence upstream of the katG start codon, a new explanation should be given to previous results. We hypothesize that the reporter activity could be explained by the presence of an unknown promoter upstream of the cloning site in the vector sequence. Transcription starting from this promoter may produce a transcript that, upon processing at 443, is stabilized by both the polypurine sequence and translation initiation. This led to the expression of the downstream reporter gene. Thus, a reporter gene assay, usually used to identify promoter sequences, led us to detect an RNA stabilizing sequence.
Therefore, in agreement with what has been suggested by Pym et al. [18], in M. tuberculosis and in M. smegmatis transcription of the katG gene may originate from the upstream pfurA promoter. A single transcript containing furA and katG is synthesized and processed to originate two different transcripts, one covering furA, the second covering katG. The latter is stabilized by the PPS and translation of the first codons of katG. In conclusion, expression of katG appears to be under the direct control of the FurA protein that controls transcription initiation at pfurA [26].
Although the transcript is processed both in M. tuberculosis and in M. smegmatis, the efficiency of the processing event differs. This may be the consequence of a better substrate in M. smegmatis and/or a more active RNAse. It would be possible to replace the M. smegmatis furA-katG intergenic region by the corresponding M. tuberculosis region and test whether a single mRNA for both genes can be found. If this occurs, one can conclude that the substrate makes the difference. On the contrary, if the transcript is completely processed, M. smegmatis RNAse is more active.
The secondary structure of the transcripts covering the M. smegmatis furA-katG region were obtained by mfold-structure prediction program of Zuker [41]. The structure of the region surrounding the processing sites is single stranded both in the transcripts starting at the furA promoter (not shown) and in the RNAs starting at psigA ( Fig. 6; pMYS739). Moreover, mutagenesis of this region, either by deletion of about 30 bp or by substitution of the bases surrounding the processing site did not prevent processing at 443. On the contrary, a double stranded RNA region impaired the processing, suggesting that the RNase involved in the processing of the furA-katG transcript requires single stranded RNA.
Several endoribonucleases have been identified in M. tuberculosis and in M. smegmatis complete genome sequence by homology with known enzymes in other bacteria [16,42]. Experiments are in progress to identify which mycobacterial ribonuclease is responsible for this processing.

Conclusion
This is the first reported case in mycobacteria, in which both a polypurine sequence and translation initiation are shown to contribute to mRNA stability. The furA-katG mRNA is transcribed from the furA promoter and likely processed by a single stranded RNAse.
Plasmids pMV261 is a multicopy mycobacterial vector, carrying the promoter region of the M. bovis BCG hsp60 gene about 300 bp upstream of the rrnABt1 transcriptional terminator [46]. pMYS648 was constructed by inserting the PCR amplified M. smegmatis 437-552 region into pMV261, digested XbaI -MscI, replacing the hsp60 regulatory region.
pSM128 is an integrative vector carrying the lacZ reporter gene [47]. Plasmids derived from pSM128, containing DNA fragments from either M. tuberculosis or M. smegmatis, were obtained by PCR amplification of the regions, digestion and cloning in the ScaI site, upstream of the lacZ reporter gene. Some of the mutated DNA fragments were obtained by the overlap extension technique [48]. The sequence of the oligonucleotides used for plasmid constructions will be provided upon request. All the inserted fragments were sequenced. pMYS739, pMYS740, pMYS743 and pMYS749 carry the psigA promoter [29]

In vitro transcription assay
Approximately 10 µg of crude extract and 4 µg of CsClbanded plasmid DNA were incubated for 10 min at 37°C in assay buffer (40 mM Tris pH 7.9, 6 mM MgCl 2 , 2 mM spermidine, 10 mM NaCl, 100 µg/ml bsa, 20 units of rnasin), followed by addition of UTP, ATP and GTP at 0.4 mM, CTP at 0.2 µM, and 5 µCi [α-32 P]-CTP per 20 µl reaction. After incubation for 30 min at 37°C, 80 µl of 200 mM EDTA and 20 µg of yeast tRNA were added and the reaction mixture was extracted with phenol-chloroform and ethanol precipitated. The pellet containing the labelled RNA was resuspended in sample buffer and analysed on a 5% denaturing polyacrylamide gel.

Rifampicin treatment
For RNA half-life measurements, cultures were grown up to OD 600 = 0.8, treated with rifampicin (500 µg/ml), and, at different time points, RNA was isolated as described below.

RNA extraction
Fifteen ml of M. smegmatis mc 2 155 cultures carrying the different plasmids (OD 600 = 0.8) were pelleted and resuspended in 100 µl of Tris-EDTA buffer; 75 µl of RNA lysis buffer (4 M guanidinium thiocyanate, 0.01 M Tris pH 7.5, 0.97% β-mercaptoethanol) were added and the suspension was sonicated (20 seconds at 40% amplitude). The RNA was then purified using the SV Total RNA Isolation System according to the manufacturer's protocol (Promega).

Beta-Galactosidase assay
Independent cultures of M. smegmatis mc 2 155 carrying the indicated plasmids were grown at 37°C to OD 600 = 0.8. Cells were collected by centrifugation, resuspended in 500 µl of TEDP (0.1 M Tris-HCl, 1 mM EDTA, 1 mM DTT and 1 mM PMSF), and disrupted by sonication (2 pulses of 20 seconds and 40% amplitude). Beta-galactosidase activity of the extracts was measured as described in Miller [50]. The enzyme activity was expressed as nanomoles of onitrophenol-beta-galactopyranoside converted to o-nitrophenol minute -1 milligram of protein -1 . Each experiment was performed three times.

Quantitative RT-PCR
Ten µg of RNA extracted as described above were retrotranscribed with Superscript II Reverse Transcriptase (Invitrogen) using random primers. Double stranded DNA binding dye iQ SYBR Green Supermix (Bio-Rad) in an iCycler iQ real time PCR detection system from Bio-Rad was used to quantify the number of target cDNA molecules in the different samples. Each reaction was run in triplicate and the melting curves were constructed. The relative expression of lacZ mRNA was determined using the ∆ (∆ Ct) method [51], with either the 16S rRNA or the sigA mRNA as standard.

RNA pol-ChIP
Ten ml M. smegmatis culture was grown up to OD 600 = 0.8, rifampicin was added to a final concentration of 500 µg/ ml and the culture incubated for 5 minutes at 37°C with shaking. The culture was then fixed with 1% formaldehyde at room temperature for two minutes under gentle shaking and the reaction stopped by addition of glycine (final concentration 0.125 M) for 10 minutes with gentle shaking. Cross-linked cells were pelleted by centrifugation, washed twice in PBS and once in STET (150 mM NaCl, 10 mM Tris-HCl pH 8, 10 mM EDTA, 0.25% Triton X-100), and finally resuspended in 2 ml of TE (10 mM Tris-HCl pH 8, 1 mM EDTA). The sample was sonicated on ice with 20 pulses of 20 seconds and 40% amplitude. The average DNA fragment size obtained was approximately 0.5 kb. After sonication insoluble debris was removed by centrifugation and the extract precleared with 40 µl 50% protein G-agarose slurry (Sigma, previously blocked with 100 µg/ml lambda DNA, 500 µg/ml tRNA, 1 mg/ml BSA) for 3 h at 4°C. 100 µl of the precleared extract were saved as input fraction. 900 µl were incubated under rotation overnight at 4°C, with 10 µl of 8RB13 mouse monoclonal antibodies to β subunit of E. coli RNA polymerase (Neoclone, cross-reacts with RNA polymerases of many others prokaryotes) in 1× RIPA buffer (140 mM NaCl, 10 mM Tris HCl pH 8, 1 mM EDTA, 1% Triton X-100, 0.1% SDS, 0.1% Na deoxycholate) and RNA polymerase-DNA complexes were immunoprecipitated with 50 µl 50% protein G-agarose slurry for 4 h under rotation at 4°C. The immunocomplex was recovered by centrifugation, washed four times with 1× RIPA buffer, once with LiCl buffer (250 mM LiCl, 10 mM Tris-HCl pH 8, 1 mM EDTA, 0.5% NP-40, 0.5% Na deoxycholate), twice with TE, and resuspended with 100 µl TE (IP fraction). 900 µl of the precleared extract were treated as above but in the absence of the antibodies (no ab fraction). The DNA of the input, IP and no ab fractions was recovered by treatment for 30 min at 37°C with RNase A (20 µg/ml) and overnight digestion with 50 µg/ml proteinase K in 0.5% SDS at 37°C. Crosslinking was reversed for 6 h at 65°C. DNA was extracted once with phenol/chlorophorm, ethanol precipitated and resuspended in 50 µl TE.
The DNA of the samples (1:10 dilution) was analyzed by quantitative PCR, as described above. Four primer pairs, useful to amplify different fragments in the furA/katG region of M. smegmatis, were used. The coordinates of the DNA fragments are reported in the legend to Figure 3.
The amount of the amplified DNA was calculated using the standard curve of each primer pair. The results of the no ab sample were subtracted from those of the IP sample, the resulting figures divided by their corresponding input and finally the result of each primer pair divided with that of the pfurA region pair.

Folding and hybridization prediction
The RNA sequence of the transcripts synthesized by pMYS739, pMYS740, pMYS743 and pMYS749 have been analyzed by the mfold program of Zucker [41].